COA Search: How to Look Up and Verify a Peptide Certificate

To search for a peptide certificate of analysis (COA), start with the identifier printed on it: a report ID, accession number or QR code. Enter it on the issuing laboratory’s own verification page, not on a page the seller controls, then compare what the lab shows with the PDF in your hands. If the two match on lot, dates, method and results, the document is the lab’s record. If they differ, or no lab-hosted record exists, you have an unverified document.
We are KMD Analytical, an independent third-party peptide testing lab in Chatsworth, California. We test mail-in vials, we do not sell peptides, and we have no stake in any result. Every certificate we issue is sealed and can be checked at kmdanalytical.com/verify. This guide covers how a COA search works for any certificate, what to compare once you find the record, and what a verified certificate does and does not tell you.
Summary
- A COA search means finding the lab-hosted record for a certificate ID or QR code and comparing it, field by field, with the copy you were given.
- Two separate questions matter: did the lab issue this report, and does the report belong to the vial or lot in front of you?
- Read three results together: identity, chromatographic purity (area %) and net-peptide content (mg per vial). Purity alone says little about how much peptide is in the vial.
- Every KMD Analytical certificate carries a unique ID and QR code and is sealed with a SHA-256 hash, so anyone can confirm it at kmdanalytical.com/verify.
- A certificate reports analytical results on the submitted sample only. It is not an endorsement of a product and not a statement about safety.
Table of Contents
- What a COA search actually is
- Step by step: look up a certificate by ID, QR code or lot number
- What a real COA contains
- How to read the three results
- Warning signs when you search a COA
- What a verified certificate does not establish
- For vendors, researchers and group organizers
- Turnaround and rush
- Our perspective
- Get a certificate that can be searched
- FAQ
- Sources
What a COA search actually is
There is no single national database of peptide certificates. Each laboratory keeps its own records, and each decides how to expose them. That is why a COA search is really a lookup in one specific lab’s system. The “search” part is knowing which identifier to use and where to enter it.
The identifiers you are likely to meet:
| Identifier | Where you find it | What it does |
|---|---|---|
| Report or certificate ID | Header or footer of the PDF | Resolves to one report in the lab’s system |
| QR code | Corner of the certificate | Opens the lab’s verification record directly |
| Accession or sample ID | Sample details block | Links the report to the lab’s intake record |
| Lot or batch number | Sample details block and the vial label | Ties the report to a manufactured batch |
| Hash or fingerprint | Footer, on sealed certificates | Lets the lab confirm the file has not been altered |
The first three tell you whether the lab issued the report. The lot number tells you whether the report is about the product you hold. Treat them as two different checks, because a genuine report does not by itself show that your vial came from the tested batch.
Step by step: look up a certificate by ID, QR code or lot number
1. Identify who issued the report
Find the laboratory’s name, address and contact details on the document. Some certificates are written by a manufacturer or a seller rather than an independent laboratory, so confirm that the name on the page is a testing lab and that it performed the analysis. Locate the lab’s website yourself, through your own search, rather than through a link printed on the PDF or supplied by the seller.
2. Enter the ID where the lab hosts it
On a lab-hosted verification page, type the report ID exactly as printed, or scan the QR code. A record that only loads on a seller-controlled page proves very little, because the seller controls what it shows. A record on the lab’s own domain is the one that counts. With our certificates, the ID or QR code resolves at kmdanalytical.com/verify, and the SHA-256 seal means the record can be checked against the file itself. SHA-256 is a standard cryptographic hash function, published by NIST in FIPS 180-4, which produces a fixed-length fingerprint that changes if even one character of the file changes.
3. Compare the lab’s record with your copy
Open both and compare every field that carries information:
- Sample name and lot or batch number
- Dates received and reported
- Method and detector
- Identity result
- Purity result
- Content result and its units
If you want to see differences quickly, you can compare the two PDF files side by side, which helps when a certificate runs to several pages. A mismatch in any result is a reason to stop and ask the issuing lab directly, using contact details you found yourself.
4. Match the certificate to the vial
The lot number on the certificate must match the label on the vial or the batch documentation. Be cautious about two orders placed months apart that carry the same lot number and the same test date. One certificate covers one tested sample, so reuse across products or batches is a reason to look at the underlying record. A repeated number is a prompt to investigate, not proof of fraud on its own.
5. If the lookup fails
If the ID does not resolve, first re-check for typos, since IDs are often case-sensitive and easily confused (O and 0, I and 1). If it still fails, contact the lab through its official website and ask whether the report exists. A lab that issued the report can confirm it. A certificate that no lab will confirm should not be relied on.
What a real COA contains
A certificate that supports a lookup usually carries more than a result. Look for:
- The laboratory’s name and contact details
- A unique report identifier and, ideally, a QR code
- Client and sample description, including lot or batch
- Dates of receipt and report
- The analytical method named in enough detail to understand it (“HPLC” alone is not a method description)
- Units on every number
- A stated specification next to each measured result, so you can see what was measured and what rule it was judged against
A summary table with no method, no lab name and no traceable identifier cannot be searched, so it cannot be verified. Presentation is not authentication: a polished PDF with a signature proves nothing until the underlying record is confirmed.
How to read the three results
Once the record is confirmed, the numbers matter. Our certificates report three results on every certificate, and the way they fit together is the same logic you should apply to any peptide COA. For a full walk-through, see our guide to reading a peptide COA number by number.
Identity
Identity answers the question: is the main peak in this vial the compound on the label? At KMD Analytical, identity means a retention-time and UV-spectral match against a reference standard. The retention time is how long the compound takes to travel through the column, and the UV spectrum is its light-absorption fingerprint. Both have to agree with the reference standard. We explain the approach further in how peptide identity is confirmed on a COA.
Chromatographic purity (area %)
Purity is the share of the total detected signal that belongs to the main peak. We run reversed-phase HPLC with UV diode-array detection (RP-HPLC-UV) on an Agilent HPLC-DAD, with quantitation at 214 nm. A 99% area purity means 99% of what the detector saw at that wavelength was the main peak. It does not say how many milligrams of peptide are in the vial, and it does not describe anything the detector could not see.
Net-peptide content (mg per vial)
Imagine a vial labeled 10 mg. A powder in that vial can include water, counter-ions and salts alongside the peptide itself. Net-peptide content is the measured mass of actual peptide, reported in mg per vial. This is the number that closes the gap between the label claim and what is really present. Our content specification is at least 90% of label claim, with no upper cap. A vial labeled 10 mg therefore needs to measure at least 9 mg of net peptide to meet it.
The three results answer different questions, and a certificate missing any one of them leaves a question open. A purity figure with no content figure tells you the proportions of what was detected but not the quantity.

Blends
A vial with more than one active needs a different layout. On our certificates, each active is reported on its own row on one certificate, with its own identity, purity and content. A blend never gets a single purity number, because one figure cannot describe two compounds. If a blend certificate you are checking shows one combined purity value, that is a reason to ask what was actually measured.
Warning signs when you search a COA
Use this list as a screen before you rely on a certificate:
- No laboratory name, or a name you cannot find independently
- No unique ID, or an ID that only resolves on a seller’s page
- Lot number that does not match the vial
- The same data reused across different products or batches
- A purity percentage with no method and no chromatogram behind it
- No content result in mg, with only a percentage
- Test date that falls before the lot could have been produced
- Results that differ between the PDF and the lab-hosted record
None of these single items is a verdict by itself. Together, they tell you how much weight a document can carry.
What a verified certificate does not establish
A verified COA confirms that a lab reported specific results on a specific submitted sample. It does not show that every vial of a product is the same, that a product is safe, or that it suits any purpose. Our certificates say this plainly: a certificate reports what was in the submitted sample, and it is not an endorsement of a product or a statement about safety.
This also shapes how you use a lookup result. A verified record tells you the lab stands behind the numbers. Connecting the numbers to the product in your hands is a separate step that depends on lot identifiers and on how the sample was chosen.
Endotoxin results are not sterility results
Some certificates include a bacterial endotoxin result. Endotoxins are fragments of bacterial cell walls, and the FDA’s guidance on pyrogen and endotoxin testing explains why they are tested for. Our endotoxin test follows USP <85> using kinetic chromogenic LAL and reports the result in EU/mL. It costs $150 per vial. It is not a sterility test, and a result should not be read as one.
For vendors, researchers and group organizers
People search for COAs for different reasons, and the practical needs differ.
Vendors and brands. If you sell peptides, a certificate that buyers can verify on the lab’s own page answers the first question a careful buyer asks. Because we do not sell peptides, we have no interest in what the result says. Details are on our page for vendors and brands.
Researchers and manufacturers. You need results you can trace to a method and a reference standard. Net-peptide content in mg per vial lets you compare what you ordered with what is present. For batch-to-batch work, we also offer ongoing testing programs and custom method development.
Buyers checking a certificate. Run the lookup steps above. If the certificate came from us, the check is at kmdanalytical.com/verify. For any other lab, use that lab’s own page. Our guide on how to verify a peptide COA and spot a fake goes deeper.
Group-testing organizers. Splitting the cost across members works because pricing falls with volume. Per-vial pricing is $150 for 1 to 4 vials, $125 for 5 to 9 vials and $100 for 10 or more. A group that pools samples into one order moves down the price tiers together. Blends add 50% per extra active, so a group should note which vials contain more than one compound. Our guide to where to get peptides tested covers how to choose a lab.

Turnaround and rush
Typical turnaround is 5 to 7 business days, with 7 as the maximum. Rush returns results the next business day for a surcharge of +100%. Rush is limited to up to 4 vials, and vials must be received by 12:00 PT.
Our perspective
A COA search only works when the certificate was built to be searched. In our experience of how testing data gets used, the weak point is rarely the chromatography. It is the document wrapped around it: a PDF that nobody can trace back to a lab record.
That is why we designed our certificates around verification first. Each one has a unique ID, a QR code and a SHA-256 seal, and the record sits at kmdanalytical.com/verify. Anyone holding the certificate, whether they ordered the test or received a copy from a seller, can confirm it without asking us for permission.
We also think three numbers belong together. Identity against a reference standard says what the compound is. Chromatographic purity says how clean the main peak is. Net-peptide content in mg per vial says how much peptide is present. A certificate that leaves one out forces the reader to guess, so ours report all three, and a blend gets one row per active.
Finally, we do not sell peptides. A lab that has nothing riding on the outcome can report what it measured and stop there.
kevin
Get a certificate that can be searched
If you need a certificate that anyone can look up, we test mail-in vials by RP-HPLC-UV and report identity, chromatographic purity (area %) and net-peptide content (mg per vial) on a sealed certificate. Vial testing runs $100 to $150 per vial depending on quantity, with bacterial endotoxin testing at $150 per vial and solution pH at $20. See the pricing page for the full list, or go straight to our peptide testing service.

You can also learn how the process works in our guide to third-party peptide testing.
FAQ
Is there one place to search every peptide COA?
No. Each laboratory hosts its own records, so you search in the issuing lab’s system using the report ID or QR code on the certificate. Find that lab’s website independently instead of following a link printed on the document.
How do I check a KMD Analytical certificate?
Enter the unique certificate ID, or scan the QR code, at kmdanalytical.com/verify. Every certificate is sealed with a SHA-256 hash, so the record can be confirmed against the file. Then compare the lot, dates and results on the page with your copy.
Does a verified COA mean the product is safe?
No. A certificate reports analytical results on the submitted sample only. It is not an endorsement of a product and not a statement about safety. If you have questions about health or safety, speak with a qualified medical professional.
What if the ID does not resolve?
Check for typos first, then contact the issuing lab through its official website to ask whether the report exists. If nobody can confirm the report, do not rely on it.
What does the endotoxin result tell me?
It reports bacterial endotoxin in EU/mL using USP <85> kinetic chromogenic LAL. It is not a sterility test. Our endotoxin testing is $150 per vial, and details are on the endotoxin page.
Sources
Recommended
- How to Verify a Peptide COA and Spot a Fake
- How to Read a Peptide COA, Number by Number
- How Peptide Identity Is Confirmed on a COA
- Third-Party Peptide Testing: How It Works
KMD Analytical reports analytical results on submitted samples only. Nothing here is medical advice or a statement that any product is safe or suitable for use.